Reliable Isolation on a Small Footprint

The 08.1 Insertable Gate Valve is designed to be installed directly between two connecting pipes without flanges. The advantage: It requires very little space.

The gate valve uses VAT's patented VATLOCK technology. It ensures a reliable gate sealing without any friction. In addition, the VATLOCK technology mechanically locks the gate in the closed position on both sides of the valve. This allows flexible and reliable use of the 08.1 Insertable Gate Valves in a wide variety of application situations and, in the case of pneumatic actuation, offers additional safety in the event of a compressed air supply failure.

In its modular design and its various design options, the 08.1 can be adapted to almost any application. 

Already installed in thousands of demanding applications, the 08.1 has proven its outstanding reliability under a wide range of process conditions.

08.1
08.1
Closed
08.1
Open

The 08.1 Insertable Gate Valve is available as manual or pneumatic version, with solenoid valve either as on board solution or for external mounting. Standard voltage of solenoid valve is 24 VDC, but other voltages are available on request. The 08.1 series uses a push rod in the manual version and is available in DN 63 - 100 mm (2.5”- 4”).

The gate position is indicated visually (mechanically) directly on the valve by means of a position indicator and is also output as an electrical signal. Standard sealing material is FKM, other materials are available on request.

Key features of the 08.1 Insertable Gate Valve

Features:

    • Insert design
    • Reliable and robust
    • VATLOCK technology – secure locking in close position on both gate sides
    • Various actuator and solenoid valve options

Benefits:

    • Only small installation space required
    • Reliable performance
    • Extended maintenance free cycle
    • Low cost of ownership
  • Technical data
Sizes DN 63 (2½’’), DN 80 (3’’), DN 100 (4")
ActuatorPneumaticDouble acting
 ManualWith Push Rod
Body Material Aluminum
Feedthrough Shaft
Installation DIN centering ring
Leak RateValve Body< 1 × 10-9 mbar ls-1
 Valve Seat< 1 × 10-9 mbar ls-1
Pressure Range 1 × 10-7 mbar to 1.6 bar (abs)
Differential PressureOn the Gate≤ 1.6 bar
 At Opening≤ 30 mbar
Cycles until first Service 200 000
TemperatureValve Body≤ 120 °C
 Actuator≤ 80 °C
 Solenoid Valve≤ 50 °C
 Position Indicator≤ 80 °C
Heating and Cooling Rate ≤ 30 °C h-1
MaterialValve BodyEN-AW-6061 (3.3211)
 MechanismAISI 304 (1.4301)
SealBonnet, GateFKM (Viton®)
Mounting Position Any
Solenoid Valve 24 VDC, 5.4 W (others on request)
Position Indicator: Contact RatingVoltage≤ 250 VAC≤ 50 VDC
 Current≤ 2 A≤ 1.2 A
Valve Position Indication Visual (Mechanical)

 

Specify standard product

Get to the product details to specify your requirements to get a quote or to get a specific CAD data download.

08.1 1 × 10-7 mbar to 1.6 bar (abs)

Insertable Gate Valve

Art. no. 08136-FA03

Size: DN 63 (2 ½")

Material: Aluminum

Actuator: Manual

Position Indication Signal: No

Solenoid valve: No

Flange: DIN centering ring

08.1 1 × 10-7 mbar to 1.6 bar (abs)

Insertable Gate Valve

Art. no. 08136-FA14

Size: DN 63 (2 ½")

Material: Aluminum

Actuator: Pneumatic: double acting

Position Indication Signal: No

Solenoid valve: No

Flange: DIN centering ring

08.1 1 × 10-7 mbar to 1.6 bar (abs)

Insertable Gate Valve

Art. no. 08136-FA24

Size: DN 63 (2 ½")

Material: Aluminum

Actuator: Pneumatic: double acting

Position Indication Signal: Yes

Solenoid valve: No

Flange: Flat flanges with O-ring grooves

08.1 1 × 10-7 mbar to 1.6 bar (abs)

Insertable Gate Valve

Art. no. 08136-FA34

Size: DN 63 (2 ½")

Material: Aluminum

Actuator: Pneumatic: double acting

Position Indication Signal: No

Solenoid valve: Yes

Flange: Flat flanges with O-ring grooves

08.1 1 × 10-7 mbar to 1.6 bar (abs)

Insertable Gate Valve

Art. no. 08136-FA44

Size: DN 63 (2 ½")

Material: Aluminum

Actuator: Pneumatic: double acting

Position Indication Signal: Yes

Solenoid valve: Yes

Flange: Flat flanges with O-ring grooves

08.1 1 × 10-7 mbar to 1.6 bar (abs)

Insertable Gate Valve

Art. no. 08138-FA03

Size: DN 80 (3")

Material: Aluminum

Actuator: Manual

Position Indication Signal: No

Solenoid valve: No

Flange: DIN centering ring

08.1 1 × 10-7 mbar to 1.6 bar (abs)

Insertable Gate Valve

Art. no. 08138-FA14

Size: DN 80 (3")

Material: Aluminum

Actuator: Pneumatic: double acting

Position Indication Signal: No

Solenoid valve: No

Flange: DIN centering ring

08.1 1 × 10-7 mbar to 1.6 bar (abs)

Insertable Gate Valve

Art. no. 08138-FA24

Size: DN 80 (3")

Material: Aluminum

Actuator: Pneumatic: double acting

Position Indication Signal: Yes

Solenoid valve: No

Flange: DIN centering ring

Customized Solution

Specify your customized solution.

If you have your specification already at hand, please upload it and submit it to us. We are happy to send you a quote.

Contact
Related products

08.2 - Insertable Gate Valve

Selected applications

Explore all applications
Mass Spectrometry & Gas Analysis

Mass Spectrometry & Gas Analysis

The control of the vacuum as well as the control of gas flows is a core element of mass spectrometry and gas analysis. Precise shut-off and control, o...

Read more